Troubleshooting common of Sand washing machine

Sand washing machine is a system of sand production line equipment, in the production process there are several common fault troubleshooting for your reference, if difficult to rule out the possibility of other failures, please call our company, we will have professional and technical personnel to answer your questions or door-to-door guidance.
Tel :0086-371-67992899 0086-371-67371699

Failure phenomena of sand washing machine:
1. Washed sand sand reduced or omitted
Reasons:
1. Sand network damage
2. Sand off bolt fixed network
Troubleshooting:
1. Inspection, maintenance or replacement of sand Network
2. Fastening bolts

Failure phenomena of sand wanshing machine:
2. Rack vibration
Reasons:
1. Loosening bolts connecting plane
2. Loose bearing bolts
Troubleshooting:
1. Fastening bolts
2. Check and tighten bolts

Failure phenomena of sand washing machine:
3. Drive some noise
Reasons:
1. Gear insufficient lubrication
2. Gear spacing changes
Troubleshooting:
1. Add enough grease
2. Adjustment and fastening anchor bolt reducer

Failure phenomenon of sand washing machine:
4. Gear easily damaged
Reasons:
1.'s Failure to make timely maintenance
2. Sand crankshaft speed reducer shaft and did not meet the provisions of Parallelism
Troubleshooting:
1. Refueling by the time
2. Adjusting to meet the requirement

Failure phenomena of sand washing machine:
5. Bearings wearing parts
Reasons:
1. Off oil or seal damage
2. The long-term lack of maintenance and cleaning
Troubleshooting:
1. Refueling or replacement by the ring
2. Periodic cleaning